HOME > Business Areas > Telecom & Communication Module
Telecom & Communication Module
|You want to give a lot of help develop the Embedded Controller, a system designed to take advantage of ESSE 860 by diffusion recognized outstanding performance in the telecommunications sector in communication systems, industrial machine control applications.
This product is designed for a system developer using a Processor, was produced to a size that can be mounted directly on the control unit inside the system, most of the MPC860 Pin Connector are connected through the expansion of the function is possible.
- MPC860 PowerQUICC processor, with integrated MMU and communication functions
- 32MByte on-board SDRAM
- 2MByte Flash memory(4MByte Can be attached to 4MByte)
- EIA-232 serial console port
- 10BaseT Ethernet interface
- 32KBit on-board Serial EEPROM(Option)
- RTC, watchdog timer, four 16-bit timers(in processor)
- BDM Support
|ESSE 8260 Module is XPC8260, SDRAM, Flash Memory, Local SRAM, Line Drive, etc. consists Selection (Handover), the transmission channel control of the general control and high-speed, ATM adaptation layer processing capability, ATM access, such as the performance and functionality, among these various functions ESSE 8260 is designed to apply the necessary functions, depending on the type of item that employs PBA.|
- Embedded 32bit RISC Controller for Flexible I / O
- Ethernet, HDLC, SDLC, Apple Talk, signaling # 7, UART, Sync UART, BiSync, 4 two Serial Communications Controller to perform functions such as protocol matching ISDN (SCC1, SCC2, SCC3, SCC4)
- Two Serial Communications Controller that provides a UART for low speed
- ATM SAR Built
- T1, E1, PCM Highway, ISDN basic rate, ISDN primary rate, User-defined TDMA Serial Interface to two time slot assigner for receiving
- Four independent baud rate generator, Clock supply Pin 8 out of SMC or SCC channel
- Four independent 16bit 32bit timer or two timers
- SPI, I2C(micro wire compatible) Interface - 2개의 PCMCIA Interface
- Various RTOS support
- PSOS, VRTX, VxWorks, Nucleus, PPOS (mini scheduler) Porting complete
- User development environment
- BDM port: Back ground debugging through the BDM available
- LAN port: Various OS support through the 10 / 100Base-T LAN Port
- RS-232 port: Mini-OS is the process scheduler class registration, registration interrupt, timer register can easily create applications such as
This module is based on an embedded high-performance RISC processor of Freescale PowerPC e500 core family and support up to 1.5GHz CPU processing speed.
A 64-bit pipelined internal CPM service module and 533MHz-based data processing capabilities through the module and to provide a DDR / DDR2 memory interface.
Dual 32-bit PCI or 64-bit PCI-X, 4-bit serial Rapid I / O, thereby providing a four-bit PCI interface. The main function of this module is as follows.
266MHz clock rate (up to 533 MHz data rate) DDR2 SDRAM
64-bit PCI 2.2 bus controller (up to 66 MHz, 3.3V I/O)
64-bit PCI-X bus controller (up to 133 MHz, 3.3V I/O)
Single x8 PCI Express
Serial Rapid IO and PCI Express High-speed connectivity
10/100Mbps 및 1Gbps Ethernet
Dual I²C Interface
This module is a high performance RISC processors based on the e500 core embedded PowerPC-based and supports up to 1GHz CPU processing speed.
A module for providing a 32-bit internal CPM module and 333MHz-based data processing capabilities through the pipeline.
The main function of this module is as follows.
- DDR memory controller (64-bit data interface, up to 333-MHz data rate)
- 8 T1 / E1 connection, and two T3 / E3 service connection function (TDM)
- I2C controller & Boot sequencer
- Local bus controller(LBC)
- Two three-speed(10/100/1Gb) Ethernet controllers(TSECs)
- Integrated DMA controller
- PCI/PCI-X controller
- System performance monitor
This module IBM PowerPC family of 32-bit RISC processor and supports up to 400MHz CPU processing speed.
4 bits processor local bus architecture, 32-bit PCI bus and Fast Ethernet, and supports dual-port GPIO and UART functions.
- PCI Revision 2.2 compliant interface (32-bit, up to 66MHz)
- Ethernet 10/100 Mbps (full-duplex)
- 2 serial ports (16550 compatible UART)
- IIC interface 및 General purpose I/O (GPIO)